- Home
- Machines
- Cover Machines
- MayCUP PLS32Q Cover Machines
MayCUP PLS32Q production machine
It is a fully automatic capping machine developed for the production of plastic caps from HIPS, PET, PS and PVC films. It produces covers with a material thickness of 0.15–0.55 mm, up to a diameter of 150 mm and a depth of 30 mm. Automatic forming, cutting and product collection systems work on a single line.
Up to 150 mm · 4.6 kWFULL TECHNICAL INFORMATION
MayCUP PLS32Q technical specifications
It is a fully automatic capping machine developed for the production of plastic caps from HIPS, PET, PS and PVC films. It produces covers with a material thickness of 0.15–0.55 mm, up to a diameter of 150 mm and a depth of 30 mm. Automatic forming, cutting and product collection systems work on a single line.
COMPLETE TECHNICAL TABLE
All technical specifications
| Maximum Mold Width | 410×150mm |
|---|---|
| Machinable Material Thickness | 0,15–0,55 mm; HIPS, PET, PS, PVC vb. plastic film |
| Producible Cover Diameter / Depth | Maximum 150mm / 30mm |
| Die Cutting Speed | 8–32 times/min. |
| Production Number | Approximately 96–384 pcs/min for 60 mm cover. |
| Material Strip Width | Maximum 430mm |
| Product Collection Department | Yes |
| Total Power | 4.6 kW |
| Power supply | 380V, 3 phase, 50 Hz |
| Weight | Packaged 1,000 kg / unpackaged 800 kg |
| Machine Size | 2300×1000×1900mm |
| Water Resource Need | 0.2 MPa water pressure; 0,3 m³/saat su girişi |
| Air Pressure Requirement | 0.5–0.7 MPa; 0,2 m³/dak. air intake |
| Perforated / Non-Perforated Cover Production | Yes |
Technical specifications are reconfirmed in the written offer according to product and project conditions. Optional equipment is determined according to the scope of the offer.
COMPATIBLE PRODUCTION ORDER
The machine is with its original mold and control system prepared together
The parts of the machine, electrical system, mold and control system are prepared in harmony with each other. Once the production settings are completed, it is tested with the selected product and real raw material.
Measurement and setting consistency in molds
The new machine is tested under real production conditions after installing the original die set and completing centering, heat, pressure, feeding and timing settings. These values constitute the factory default settings of the machine.
In this way, the risk of loss of adjustment, decrease in production speed, unplanned stoppage and increase in wastage that can be caused by an incompatible mold change is reduced. Production progresses more regularly and it becomes easier to control costs.
Choose the right machine today, get clear on the deliverables.
Share your product and target capacity; Clarify the machine, mold, auxiliary equipment and starting raw material that suits you with our sales and technical team.